Abdelhedi, R., Ammari, A.C., Lahyani, A., Sari, A., Venet, P., An improved frequency sharing strategy between battery and supercapacitors in electric vehicles, ELECTRIMACS, 4-6 July, 2017, Toulouse, France,6p.

Abdelhedi, R., Ammari, A.C., Sari, A., Lahyani, A., Venet, P., Optimal power sharing between batteries and supercapacitors in electric vehicles, 7th International Conference on Sciences of Electronics, Technologies of Information and Telecommunications (SETIT 2016), 18-20 December, 2017, Hammamet, Tunisia, pp. 97-103. (Indexé sous Scopus)

Attig Bhar, F., Guellouz, M.S., Sahraoui, M., Kaddeche, S., A brief critical review of solar chimney power plant literature and economic analysis of a 50 kW power plant in the Tunisian south: Tozeur location, 4th International Conference on Green Energy and Environmental Engineering (GEEE’17), 22-24 April, 2017, Sousse, Tunisia, 7p.

Chouat, I., Driss, A., Maalej, S., Zaghdoudi, M.C., Investigation on the thermal performance of a nanofluid-filled cylindrical grooved heat pipe, World Symposium on Mechatronics Engineering & Applied Physics (WSMEAP), 1-2 July, 2017, Sousse, Tunisia, 9p.

Dhahbi-Megriche, N., El-A. Slama, M., Beroual, A., Influence of dry bands on polluted insulator performance, International Conference on Engineering and MIS (ICEMIS), 8-10th May, 2017, Monastir, Tunisia, 6p. (indexé sous Scopus)

Driss, A., Chouat, I., Maalej, S., Zaghdoudi, M.C., Thermal performance of a helicoidally grooved cylindrical copper heat pipe, World Symposium on Mechatronics Engineering & Applied Physics (WSMEAP), 1-2 July, 2017, Sousse, Tunisia, 7p.

Driss, A., Maalej, S., Zaghdoudi, M.C., Electro-Thermal modeling of power IGBT modules by heat pipe systems, International Conference on Engineering & MIS (ICEMIS), 8-10 May, 2017, Monastir, Tunisia, 7p. (indexé sous Scopus)

Driss, A., Maalej, S., Zaghdoudi, M.C., Thermal modeling of the cooling of a power MOSFET by heat pipes, International Conference on Engineering & MIS (ICEMIS), 8-10 May, 2017, Monastir, Tunisia, 6p. (indexé sous Scopus)

Guizani, S., Ben Ammar, F., Fault tolerant reconfiguration for two 2-level cascaded inverters fed the dual open-end stator windings IM, 4th International Conference on Green Energy and Environmental Engineering (GEEE’17), 22-24 April, 2017, Sousse, Tunisia, 5p.

Guizani, S., Ben Ammar, F., Experimental prototyping for different induction machine structures, 4th International Conference on Green Energy and Environmental Engineering (GEEE’17), 22-24 April, 2017, Sousse, Tunisia, 6p.

Nafaa, B., Cretu, B., Isamail, N., Touayar, O., Simoen, E., Impact of cryogenic temperature operation on static and low frequency noise behaviors of FD UTBOX nMOSFETs, Joint International EUROSOL Workshop and International Conference on Ultimate Integration on Silicon-ULIS (EUROSOI-ULIS 2017), 3-5 April, Athens, Greece, 2017, pp. 95-98. (Indexé sous Scopus)

Nafaa, B., Cretu, B., Ismail, N., Touayar, O., Simeon, E., Impact of channel orientation on low frequency noise performances of UTBOX nMOSFETs operated at liquid nitrogen temperature, International Conference on Noise and Fluctuations (ICNF 2017), 20-23 June, Vilnius, Lithuania, 6p. (Indexé sous Scopus)

Nakhli, Z., Ben Hatira, F., Pithioux, M., Chabraud, P., Femoral neck quasi brittle fracture prediction of human femur, 23rd Congress of the European Society of Biomechanics, 2-5 July, 2017, Seville, Spain, 1p.

Nakhli, Z., Ben Hatira, F., Pithioux, M., Chabrand, P., Dépendance de la modélisation par éléments finis du fémur humain de la reconstruction tridimensionnelle, 7ème Congrès International Conception et Modélisation des Systèmes Mécaniques (CMSM 2017), 27-29 March, 2017, Hammamet, Tunisia, 3p.

Nouiri, M., Jemai, A., Ammari, A.C., Bekrar, A., Trentesaux, D., Niar, S., Using loT in breakdown tolerance : PSO solving FJSP, International Design and Test Workshop, 3rd February, 2017, 7843008, pp. 19-24, 11th International Design and Test Workshop, IDT 2016; Hammamet, Tunisia, 18 -20 December, 2016; Category number CFP1663D-ART; Code 126365.

Ouaz, I., Maalej, S., Zaghdoudi, M.C., Thermodynamic performance of an ejecto-compressor refrigeration machine, International Congress on Energetic and Environmental Systems (IEES), 17-19 November, 2017, Djerba, Tunisia, 6p.

Oueslati, I., Dhahbi-Megriche, N., 3D computation of electrical field and potential on discontinuous polluted insulators, 6ème Colloque International de la Recherche Appliquée et du Transfert Technologique (CRATT 2017), 14-16 Avril, 2017, Hammamet, Tunisie, 5p.

Saad, I., Maalej, S., Zaghdoudi, M.C., Numerical study on the electrohydrodynamic effects on a nanofluid-filled flat axially grooved heat pipe, World Symposium on Mechatronics Engineering & Applied Physics (WSMEAP), 1-2 July, 2017, Sousse, Tunisia, 8p.

Salas, A., Georgakis, P., Nwagboso, C., Ammari, A.C., Traffic event detection framework using social media, 14 September 2017, Article number 8038595, pp. 303-307, IEEE International Conference on Smart Grid and Smart Cities (ICSGSC 2017), Singapore; Singapore; 23-26 July 2017; Category number CFP17URA-ART; Code 130882.

Trigui, A., Ali, M., Ammari, A.C., Savaria, Y., Sawan, M., A 14.5 mw generic carrier width demodulator for telemetry-based medical devices, Proceedings IEEE 15th International New Circuits and System Conference, NEWCAS 2017, 8010182, pp. 369-372, 15th IEEE International New Circuits and Systems Conference, NEWCAS 2017, Strasbourg; France; 25-28 June 2017; Category numberCFP17NEW-USB; Code 129927. (Indexé sous Scopus)

Zgarni, S., Abid, F., Braham, A., Artificial immune network for bearing fault detection of induction motor, 5th International Conference on Control and Signal Processing (CSF 2017), 28-30 October, 2017, Kairouan, Tunisia, 4p.